home.jpg
faqs.jpg
sitemap.jpg
dewlers2.jpg
 
 

Rolloff & Hooklift Replacement Tarps

product_details.jpg

  • All of our tarps are made in-house in Wilson, NC. NO CHINESE IMPORTS HERE!
  • Our standard replacement tarps for automated tarp systems finish out at 9’6” x 28’ with the flaps folded out and 8’x28’ with the flaps folded in.
  • Each tarp features a 9’6” x 10’ piece of vinyl reinforcement at the front of the tarp to allow for reinforcement for varying height containers.
  • Each tarp comes standard with a 6” sleeve at the front of the tarp for quick tarp replacement.
  • Tarps come standard with 9” flaps, this gives extra tarp reinforcement where the corners of the container rub the tarp if the flaps are left folded in.

 

   
 12oz-mesh3.jpg

 12oz Black Mesh

  • Ideally suited for hand tarps, dump truck tarps and semi-automated tarps
  • Weighs 12oz per square yard
  • Comes in 61”, 84” and 96” widths off the roll, easily weldable for custom widths and lengths
  • Entry level tarp material for automated tarp systems
   
 gator2.jpg

 Gatormesh

  • Ideally suited for hand tarps and auto-tarpers replacement tarps
  • Lightweight, weighs 7.6oz per square yard
  • Comes in 144” widths off the roll and cannot be heat seamed
  • Higher tear strength, puncture strength and a tighter weave than the 12oz mesh
  • Stiffer than the 12oz mesh, less load conformance
   
 scrappie2.jpg

 Scrappie

  • Ideally suited for scrap metal haulers, C&D, land clearing, wherever torturous loads are present from dump trucks to auto-tarp replacement tarps. NOT recommended for semi-auto tarp systems 
  • Heavyweight mesh, weighs 14oz per square yard
  • Comes in 144” widths off the roll and cannot be heat seamed
  • Highest tear and burst strength mesh available
  • High load conformance material, IE very flexible
   
 

© 2017 obriantarping.com • Design by AWD

O’Brian Tarping Systems • O’Brian Custom Boat Covers • 2330 Womble-Brooks Rd
Wilson, NC 27893 • 1-252-291-2141 • 1-252-291-1416 Fax • sales@obriantarping.com